Comments on: Is it possible for a data recovery specialist to retrieve files from a very old crashed computer? http://www.valuabledatarecovery.com/computer-data-recovery/is-it-possible-for-a-data-recovery-specialist-to-retrieve-files-from-a-very-old-crashed-computer Safely Getting Your Data Back Mon, 28 Dec 2009 10:48:59 +0000 http://wordpress.org/?v=2.9.1 hourly 1 By: Amit Pandey http://www.valuabledatarecovery.com/computer-data-recovery/is-it-possible-for-a-data-recovery-specialist-to-retrieve-files-from-a-very-old-crashed-computer/comment-page-1#comment-1215 Amit Pandey Mon, 28 Dec 2009 10:48:59 +0000 #comment-1215 Ya it is very much possible try to connect with some data recovery company recommended stellar and send your hard drive to the company there is no cost of checking the hard drive status, means stellar provides free of cost checking whether data is recoverable or not. If there is any possibility of recovery stellar estimate the cost and if you satisfied with the price give them for recovery or take the hard drive from the company. More info is available here: http://www.stellarinfo.com/data-recovery-services.htm or you can contact them via http://www.stellarinfo.com/contact.htm . Cheers...<br><b>References : </b><br>Experience Ya it is very much possible try to connect with some data recovery company recommended stellar and send your hard drive to the company there is no cost of checking the hard drive status, means stellar provides free of cost checking whether data is recoverable or not. If there is any possibility of recovery stellar estimate the cost and if you satisfied with the price give them for recovery or take the hard drive from the company. More info is available here: http://www.stellarinfo.com/data-recovery-services.htm or you can contact them via http://www.stellarinfo.com/contact.htm .

Cheers…
References :
Experience

]]> By: Colanth http://www.valuabledatarecovery.com/computer-data-recovery/is-it-possible-for-a-data-recovery-specialist-to-retrieve-files-from-a-very-old-crashed-computer/comment-page-1#comment-1214 Colanth Mon, 28 Dec 2009 10:39:59 +0000 #comment-1214 Cost - $15 plus either shipping or tax, depending on whether you have a Micro Center near you. Buy http://microcenter.com/single_product_results.phtml?product_id=0278844 Take the drive out of the crashed computer. (There are 4 small screws holding the drive in on its sides - one or more may be missing.) Remove the 2 cables from the drive [they just pull off - pull the connectors, not the cables], remove the screws and slide the drive out. Connect it to the adapter - the power connector (the smaller one) is on the power pack cable. The large connector is on the plastic housing of the adapter itself - just plug the adapter into the drive. (Watch for 2 things. 1) Use the larger of the connectors on the adapter - the small one is for laptop drives and 2) the connector only goes in one way. There's a little piece sticking out on one of the long faces of the connector and a "slot" in the drive's connector - match them up.) Then plug the drive into the computer the same way you'd connect an external drive or flash drive, and copy off all the files from the old drive. Or just use it as an external drive. This isn't rocket science - or even difficult. You can do it yourself. Take your time (the whole process should take you about 15-30 minutes the first time, to remove the drive and hook it up to the adapter. And about 2 minutes if you ever have to do it again.) I upgraded this computer to Windows 7 a couple of weeks ago, and my Vista backup is on an external drive connected with that adapter - for 2 weeks now. (I copy back the files I need as I find I need them.) Have fun.<br><b>References : </b><br> Cost – $15 plus either shipping or tax, depending on whether you have a Micro Center near you. Buy http://microcenter.com/single_product_results.phtml?product_id=0278844

Take the drive out of the crashed computer. (There are 4 small screws holding the drive in on its sides – one or more may be missing.) Remove the 2 cables from the drive [they just pull off - pull the connectors, not the cables], remove the screws and slide the drive out. Connect it to the adapter – the power connector (the smaller one) is on the power pack cable. The large connector is on the plastic housing of the adapter itself – just plug the adapter into the drive. (Watch for 2 things. 1) Use the larger of the connectors on the adapter – the small one is for laptop drives and 2) the connector only goes in one way. There’s a little piece sticking out on one of the long faces of the connector and a "slot" in the drive’s connector – match them up.)

Then plug the drive into the computer the same way you’d connect an external drive or flash drive, and copy off all the files from the old drive. Or just use it as an external drive.

This isn’t rocket science – or even difficult. You can do it yourself. Take your time (the whole process should take you about 15-30 minutes the first time, to remove the drive and hook it up to the adapter. And about 2 minutes if you ever have to do it again.) I upgraded this computer to Windows 7 a couple of weeks ago, and my Vista backup is on an external drive connected with that adapter – for 2 weeks now. (I copy back the files I need as I find I need them.)

Have fun.
References :

]]>